EN/BS Fire Resistance Testing
Fire TS Laboratory's IANZ accreditation scope allows to conduct certification testing in accordance with EN and BS standards. The testing can be undertaken in the pilot and in the full scale furnaces dependent on the system certification requirements.
Contact Us
Certification Testing
An endorsed/certification report is issued based on the undertaken test in either pilot or full scale - dependent on the testing prototype. The report format is strictly compliant with EN/BS guidelines; issued with IANZ & ILAC MRA endorsement and signed by an IANZ signatory. The issued report is a valid document that identifies FRL/FRR (fire resistance level/rating) of elements in construction and officially accepted by industry regulators.
Note: Endorsed report issuance in 2 weeks’ time after the test.
Note: Endorsed report issuance in 2 weeks’ time after the test.
Research Testing
Pilot/full-scale research testing on building materials, components and systems can be completed to evaluate their performance as a part of the R&D process prior to the endorsed testing. The results of the research test are compiled as raw data in Excel.
The raw data of the sponsored research testing provides valuable insights into the system performance deficiencies (if any) and assists with the direction of further research effort. It also gives a higher level of confidence to the sponsor during the endorsed testing stage.
The raw data of the sponsored research testing provides valuable insights into the system performance deficiencies (if any) and assists with the direction of further research effort. It also gives a higher level of confidence to the sponsor during the endorsed testing stage.
Cellulosic Temprature Curve
BS 476 Fire Tests on Building Materials and Structures
Part 20 Method for determination of the fire resistance of elements of construction (general principles)
Part 21 Method for determination of the fire resistance of loadbearing elements of construction
Part 22 Method for determination of the fire resistance of non-loadbearing elements of construction
Part 23 Method for determination of the contribution of components to the fire resistance of a structure
EN 1363-1 Fire resistance tests – General requirements
EN 1363-2 Fire resistance tests – Alternative and additional procedures
Section 4 Hydrocarbon curve
Section 5 External fire exposure curve
Section 6 Slow heating curve
Section 8 Measurement of radiation
EN 1364-1 Fire resistance tests for non-loadbearing elements – Walls
EN 1364-2 Fire resistance tests for non-loadbearing elements – Ceilings
EN 1364-3 Fire resistance tests for non-loadbearing elements. Curtain walling. Full configuration (complete assembly)
EN 1364-4 Fire resistance tests for non-loadbearing elements. Curtain walling. Part
configuration
EN 1365-1 Fire resistance tests for loadbearing elements – Walls
EN 1365-2 Fire resistance tests for loadbearing elements – Floors and roofs
EN 1366-3 Fire resistance tests for service installations – Penetration seals
EN 1366-4 Fire resistance tests for service installations – Linear joint seals
EN 1634-1 Fire resistance test for door and shutter assemblies and openable windows
ISO 834-1 Fire-resistance tests – Elements of building construction – General
Requirements
Part 21 Method for determination of the fire resistance of loadbearing elements of construction
Part 22 Method for determination of the fire resistance of non-loadbearing elements of construction
Part 23 Method for determination of the contribution of components to the fire resistance of a structure
EN 1363-1 Fire resistance tests – General requirements
EN 1363-2 Fire resistance tests – Alternative and additional procedures
Section 4 Hydrocarbon curve
Section 5 External fire exposure curve
Section 6 Slow heating curve
Section 8 Measurement of radiation
EN 1364-1 Fire resistance tests for non-loadbearing elements – Walls
EN 1364-2 Fire resistance tests for non-loadbearing elements – Ceilings
EN 1364-3 Fire resistance tests for non-loadbearing elements. Curtain walling. Full configuration (complete assembly)
EN 1364-4 Fire resistance tests for non-loadbearing elements. Curtain walling. Part
configuration
EN 1365-1 Fire resistance tests for loadbearing elements – Walls
EN 1365-2 Fire resistance tests for loadbearing elements – Floors and roofs
EN 1366-3 Fire resistance tests for service installations – Penetration seals
EN 1366-4 Fire resistance tests for service installations – Linear joint seals
EN 1634-1 Fire resistance test for door and shutter assemblies and openable windows
ISO 834-1 Fire-resistance tests – Elements of building construction – General
Requirements
Our Equipment
Fire TS Laboratory's pilot and full-scale furnaces are highly sophisticated equipment which demonstrate consistent performance and produce reliable results.
